Korean Auto Guide Hyundai & Kia ownership, explained
VIN & Numbers

Find Your VIN and Engine Number Without Taking Anything Apart

Two cars that look identical can take different pads, sensors and clutches. The VIN is how you stop that happening — here is where it is, how to read it, and what to send when you need a part.

By Korean Auto Guide editorial team Updated 15 November 2026 8 min read

The short answer

  • VIN — 17 characters, no letters I, O or Q. On the windscreen plate, the door shut sticker, the engine bay plate and the registration document.
  • Engine code — a short designation such as G4FC, G4LA or D4FB, usually on a sticker on the cam cover and on the registration document.
  • Engine number — a longer serial stamped on the block, and a different thing from the code.
  • Send a photo of the VIN plate and the problem stops being a guess.

What a VIN actually contains

The vehicle identification number is standardised so that any manufacturer's car can be identified by any system in the world. Seventeen characters, arranged in fixed groups: the manufacturer's world identifier, the build description, a check digit, the model year, the plant, and a sequential serial. You do not need to memorise it, but knowing which part does what explains why a parts counter asks for it before anything else.

PositionsWhat they identifyWhy it matters to you
1–3Manufacturer and the market the car was built forExplains why two identical-looking cars can have different emissions and safety parts
4–8Model, body style, engine and restraint systemThis is where the engine variant is settled
9Check digitLets a system confirm the number is valid, not mistyped
10Model yearOften differs from the registration year — use this one for parts
11Assembly plantMatters when the same model was built in more than one place
12–17The car's own serial numberIdentifies the exact build, including mid-year changes

Where to find it: four places, one of them reliable

  1. Through the windscreen. Stand in front of the car and look at the bottom corner of the glass on the driver's side. A small plate shows the full number. It is the easiest place to photograph, and the easiest to fake.
  2. The door shut face. Open the driver's door and look at the sticker on the pillar or the door edge: VIN, paint code, tyre pressures, sometimes the build date. This is the most useful sticker for an owner because it also carries the paint and trim codes.
  3. The engine bay. A plate riveted to a strut tower or the firewall, or a sticker nearby. On older cars the plate carries the engine and gearbox codes as well.
  4. The registration document. Always check this against the car. If the two disagree, someone has fitted a different panel or the document belongs to another vehicle, and that is a conversation worth having before you buy anything.

There is also a stamped number on the body — on the floor pan under a flap, or on the bulkhead — which is the one a safety inspection uses because it cannot be unbolted. You rarely need it, but knowing it exists explains why an inspector will not accept a sticker.

Engine code versus engine number

These two get used interchangeably by owners and should not be. The engine code is a family designation: G4FC for a 1.6 petrol, G4LA for a 1.2, D4FB for a 1.6 diesel, and so on. It tells a catalogue which drawing, which sensor list and which belt or chain applies. It is usually printed on a sticker on the cam cover or timing cover, and it appears on the registration document.

The engine number is a serial stamped into a machined pad on the block — often low down near the gearbox joint, sometimes under the intake. It identifies that individual engine, and it is what an inspector checks against the document. It also matters when an engine has been replaced, because the car's build sheet no longer describes what is under the bonnet.

On a Hyundai or Kia, the last characters of the engine code carry the variant letters, and that suffix is what makes two 1.6 engines take different sensors, different manifolds or different emissions hardware. When someone says "it depends on the engine", this is what they mean.

Why this changes the part you get

Vehicle manufacturers revise parts during a model's life without changing the badge. A brake pad shape, a coil connector, a clutch release bearing or an oxygen sensor plug can change mid-year. Catalogues handle this by asking for the VIN: it resolves the build specification rather than the marketing name.

The practical consequences of skipping it are familiar to anyone who has stood at a counter twice in one day: a pad that does not fit the caliper bracket, a coil with the wrong connector keyway, a clutch kit with the wrong release mechanism, a sensor with a different plug. None of these are the supplier's fault if they were only told "i20, 2016".

You giveWhat it settlesWhat is still open
Model name onlyAlmost nothingEngine, year, variant, market specification
Model and yearBroad drawingMid-year changes, engine variant, market differences
Engine codeEngine-specific partsBody and brake variants built on the same engine
Full VINBuild specification, model year, plantWhether the part on the car has already been changed once
VIN plus a photo of the old partEverything above plus the number cast into the partNothing material — this is the best you can do from a distance

Reading the registration document

The registration document is the fastest source of three things: the VIN, the engine number and the engine capacity. It usually does not show the engine code, so the sticker on the engine is still worth photographing. Check that the VIN on the document matches the sticker on the door pillar — a mismatch is a red flag on any car you are about to buy, repair or insure.

One caution about years. The document shows the date of first registration, the VIN shows the manufacturer's model year, and the two can be a year apart on a car that sat in stock or was registered late. For parts, the VIN is the figure that matters.

What to send for a quote

Four items, in one message, get you the right part the first time:

  • A photo of the VIN plate, readable in one shot — the windscreen plate or the door sticker is enough.
  • The engine code as it appears on the cam cover sticker, if you can see it.
  • The model, year and engine size exactly as written on the registration document.
  • A photo of the old part, especially any number cast or stamped into it, and a photo of the plug or mounting if it is an electrical part.

If the part is not the original, say so. A replaced engine, a swapped gearbox or a modified brake setup changes the answer, and it is the one thing no document will tell the person quoting.

Where to look, by model family

Model familyVIN plateEngine code sticker
i10, Picanto, AtosWindscreen corner and driver's door pillarCam cover, often partly hidden by the air box
i20, Rio, Accent, GetzWindscreen and door shut; older cars also have a firewall plateCam cover or timing cover, facing the radiator on many engines
Elantra, Cerato, i30Door pillar sticker with paint and trim codesCam cover; the suffix letters matter most here
Tucson, Sportage, ix35Strut tower plate and door stickerCam cover, sometimes under a plastic engine cover
H-1, H-100, K2700Firewall plate and door stickerDiesel: on the timing cover or the block near the injection pump

Frequently asked questions

Where is the VIN?

Windscreen lower corner, driver's door shut, an engine bay plate, and the registration document. A stamped body number exists too, under a flap or on the bulkhead.

Engine number or engine code?

The code is the family designation and picks the drawing; the number is the serial on the block and confirms the build.

Is model and year enough?

It gets you close and it is how wrong parts are sold. Mid-year changes and engine variants need the VIN.

Why is the VIN year different from registration?

Build and first registration are different dates. For parts, use the model year in the VIN.

What should I send for a quote?

A photo of the VIN plate, the engine code, the details from the document, and a photo of the old part with any number visible.

General information only. VIN layouts, sticker locations and engine code formats vary by model, model year, plant and market. Always confirm identification against the vehicle itself and the registration document, and treat a VIN mismatch as a matter to resolve before spending money.