The short answer
- Older families use a belt — Alpha, Beta, Epsilon and the 2.5 and 2.7 four-cylinder diesels.
- Later families use a chain — Kappa, Gamma, Nu, Theta and the U2 diesel.
- A belt has a replacement interval; a chain has a wear symptom. Neither is permanent.
- A broken belt bends valves. It is not a breakdown, it is an engine-out repair.
- Do the water pump, tensioner and idler with the belt. The labour is the expensive part, not the parts.
Which engine do you have?
The engine code is on a sticker on the cam cover or the timing cover, and it appears on the registration document. The first four characters identify the family: G for petrol, D for diesel, then a family digit, then the variant letters. Once you know the family, the belt question answers itself.
| Engine family | Typical codes | Drive | Where you see it |
|---|---|---|---|
| Alpha | G4EK, G4ER, G4EA | Belt | Older small cars and hatchbacks |
| Epsilon | G4EC, G4GC derivatives | Belt | Older 1.5 and 1.6 petrol models |
| Beta | G4GC, G4GB | Belt | Older 2.0 petrol saloons and SUVs |
| Kappa | G3LA, G3LC, G4LA, G4LC | Chain | 1.0 and 1.25 city cars |
| Gamma | G4FA, G4FC, G4FD | Chain | 1.4 and 1.6 petrol, very widely used |
| Nu | G4NA, G4NB, G4NC | Chain | 1.8 and 2.0 petrol |
| Theta | G4KD, G4KE, G4KH | Chain | 2.0 and 2.4 petrol, including turbo versions |
| U2 diesel | D4FB, D4FD, D4FC | Chain | 1.5 and 1.6 common-rail diesel |
| Older 2.5 and 2.7 diesel | D4BH, D4CB early, J2 | Belt | Vans, light trucks and older utilities |
Families and codes are a guide, and manufacturers mixed variants across years. The sticker on your own engine and the handbook for your VIN are the authority; this table is for orientation.
Telling them apart on the car
Two belts are visible at the front of an engine and they are not the same thing. The accessory belt — also called the drive belt or serpentine belt — runs on the outside, driving the alternator, the air-conditioning compressor and sometimes the power-steering pump. It is meant to be seen and replaced, and it failing leaves you without charging or steering assistance, not with a destroyed engine.
The timing belt is hidden behind a narrow cover, usually plastic, held by a handful of bolts. If you can see a toothed belt driving a camshaft sprocket once that cover is off, you have a belt engine. A chain engine has a sealed case with no serviceable belt behind it, and often a distinctive tick or rattle on cold start once the tensioner is tired.
If you are still unsure, do not guess: a belt is cheap and a wrong assumption is not. Any workshop can confirm it in a minute, and the parts counter will confirm it from the VIN.
Intervals: distance and time
Belt schedules usually state both a distance and a period, and the first one reached applies. A typical figure on these engines is in the range of sixty to a hundred thousand kilometres, or around five years, whichever comes first — but the handbook for your model and engine code is the number to work from, because some variants were shortened after field experience.
The time limit matters more than owners expect. A belt with modest mileage still ages: rubber hardens, the teeth crack at the root, and oil from a leaking cam seal or coolant from a weeping water pump softens it from the outside. A car that has stood for long periods is not exempt.
Chains have no scheduled replacement in most handbooks. That does not mean they last the life of the car. What wears is the chain itself, the tensioner and the plastic guides; the symptom is a rattle from the front of the engine for a second or two on a cold start, or a correlation code between the cam and crank sensors. Catch it at the rattle and it is a chain and guide job. Ignore it and the chain can jump a tooth, which produces the same valve damage as a broken belt.
What a failure actually costs
These are interference engines: at some point in the cycle the pistons and valves occupy the same space. A belt that breaks at speed stops the camshafts while the crankshaft keeps turning, so the pistons hit whatever valves are open. The result is bent valves, damaged guides, sometimes a cracked head or a marked piston.
That changes the job completely. A scheduled belt is a maintenance item with a predictable part list. A broken belt is a cylinder-head removal, a valve job, new gaskets and bolts, and an inspection for damage below — with the possibility that the head or a piston is beyond reuse. It is the clearest example in this whole site of a cheap part that is expensive to ignore.
What the job should include
| Item | Why it goes in the same job |
|---|---|
| Timing belt | The part with the interval; replace regardless of appearance |
| Tensioner and idler pulley | Bearings that fail before the belt does, and they are already exposed |
| Water pump, where belt-driven | A leaking pump destroys the new belt; the labour is already paid |
| Cam and crank seals | Oil on a new belt shortens its life; seals are cheap once it is apart |
| Coolant | Drained for the pump, and should be renewed with the correct specification |
| Accessory belt | Same access, and it has its own age |
| Engine mount inspection | Often disturbed for access; a split mount is cheaper to spot now |
We publish no amounts. The parts are a modest part of a belt job; the labour and what has to be removed for access decide the bill. Ask for the part list and whether the pump and seals are included before comparing quotes.
When it is a chain
A chain job is a bigger strip-down than a belt job: covers off, often the sump or a timing case seal, then the chain, tensioner, guides and sometimes the sprockets. It is not something to authorise on a noise alone — a cold-start rattle can also come from a worn accessory belt tensioner or a loose heat shield. Have the noise located with the engine cold and running before agreeing to it.
What makes it worth doing properly is that a chain that jumps does the same damage as a broken belt. If the rattle is confirmed as internal and a correlation code is stored, waiting is not a saving.
Model notes
| Model family | Usual drive | What to watch |
|---|---|---|
| i10, Picanto, Atos | Chain on later cars, belt on the oldest | Confirm by engine code — this is where owners most often assume wrongly |
| i20, Rio, Accent, Getz | Chain on Gamma engines, belt on Alpha and Epsilon | Check the code before booking anything |
| Elantra, Cerato, i30 | Chain | Cold-start rattle and correlation codes at high mileage |
| Tucson, Sportage, ix35 | Chain on Theta, belt on older Beta | Turbo versions need the correct chain kit, not a generic one |
| H-1, H-100, K2700 | Chain on U2, belt on older 2.5 and 2.7 | Belt jobs on these are also the time to do the pump and seals |
Frequently asked questions
Belt or chain — how do I know?
Engine code on the cam cover, then look for a narrow removable cover at the front of the engine. The belt you can see outside is the accessory belt, not the timing belt.
Is a chain maintenance-free?
No fixed interval usually, but chains stretch and tensioners wear. A cold-start rattle is the warning.
What if the belt breaks?
Valves meet pistons. The job becomes a head repair or an engine, not a belt.
Does time count as well as distance?
Yes. Rubber ages and contamination shortens life, so service on whichever limit comes first.
Water pump with the belt?
Yes where the pump is belt-driven. Repeating the strip-down later costs the same labour again.
General information only. Belt or chain fitment, intervals and part numbers differ by engine code, model year and market, and some variants changed during production. Confirm against your own engine's sticker and handbook before booking work, and have timing work carried out by a qualified technician.